Can (or should) you resling cams yourself?
Premium Members can read the entire article here:
image: HowNOT2, https://www.youtube.com/watch?v=M19taMAZHp4
The generally accepted maximum lifespan of soft goods like nylon, Dyneema, and yes, slings on your cams, is around 10 years. If you use them heavily, it could be a lot less than that.
Reslinging a cam is not a money-making venture by the manufacturer or pretty much anybody else. Also, a manufacturer will almost always only resling their own cams.
If you live in the US, and a few places in Europe, getting this done by the factory is a possibility. But, if you’re outside this area (or if you live in Europe, and have cams made by Black Diamond) sending them directly to the manufacturer for sling replacement is probably not be cost effective.
So, what about replacing those cam slings yourself?
Here are some break test results of various DIY cam sling replacement options tested my friend Ryan Jenks, the mad scientist gear-breaking founder of HowNOT2.
(Disclaimer, these were tested on a limited number, your mileage may vary, if you want to be certain it's done right, then send ‘em back to the factory.)
Summary:
A 30 cm Dyneema sling doubled with a basket hitch is probably going to be your best bet. Be sure and clip both strands! Broke at 17.2 kN.
A 30 cm Dyneema sling tied in a double bowline on a bight also works. Broke between 10 and 13 kN, based on sling width. (Interestingly, the 8 mm sling tested stronger than the 11 mm sling.)
Avoid a girth hitch! Broke at 9 kN, and will probably mess up your cam. (Interestingly, it broke at 9-ish kN both on the slow pull and in the drop tower.)
Or, if you want to skip it entirely, cut off the sling and clip a short quick draw to it, good to go.
Cam reslinging companies
This information is current as of 2024. Of course, policies can change, so check before you mail anything.
If you know anyone who reslings cams who is not on this list, please email me so I can add them, thanks!