A good rule of thumb in climbing is to never let anything hang below your knees.  But what do you do with a single /60 cm or double / 120 cm runner to shorten it up for racking?

Answer: the “alpine quickdraw”.

A simple trick is this method, best described with a photo. This triples up the webbing material, shortening your runner to a manageable length. You can clip to gear it tripled like this, or remove two of the three strands from one carabiner to use it at full extension.

(I learned this crafty trick decades ago, and still remember my fascination at seeing it for the first time. At the time I thought it was the really clever! Hopefully if this is new to you, you’ll think somewhat the same thing. :-)

1 - Start with a runner and two carabiners.

2 - Pass one carabiner through the other.

3 - Clip the bottom loop.

Done! A short and compact draw that hangs nicely on your harness, but is easy to deploy at full length.

Safety note: Having a rubber band or something similar to prevent the bottom carabiner on a sport climbing quickdraw from rotating is fine. But you never want to do this on an “open” sling, as the rope can easily become completely unclipped from the carabiner without you noticing. More details at this article.